motion controller card by oes

Plug-and-Play
Quick and Easy to Install
Very Compact and Easy to Use
Low Power Consumption
Small Size, 2.7 in ( 68.1 mm) x 2.1 in (53.3 mm)
Easy Programming Language, No Compiler or Assembler Required
Different Modes of Operation:
- Stand-alone, No PC Required to Operate
- Host Controlled, PLC, C/C++, Visual Basic, LabVIEW™

Software

Easy System Setup and Evaluation
Menu Driven
Free Software Included
Programming Examples

Dedicated Inputs

Positive and Negative Limit Switches per Axis
Home Switch per Axis

General Purpose Digital Input / Output

4 TTL / CMOS Inputs
4 TTL / CMOS Outputs
Quadrature Signals

General Purpose Analog Input

4 Inputs
10 Bits of Resolution

Communication Interface

USB Interface

The motion control card is an easy-to-use, plug-and-play and cost effective solution for single-axis motion control applications. It may be used as a stand-alone unit or may be commanded by an external device.

This series supports one axis of motion, 4 TTL / CMOS compatible inputs, 4 TTL / CMOS compatible outputs, 4 analog inputs. The command port is provided for stand-alone operation.

The powerful programming instructions include motion control, system configuration, data flow, program flow commands, 32-bit logical and mathematical operations, and other miscellaneous instructions.

Ordering Information

Part No.	Description	Amount
GLORY-01	Single-axis Stepper and Servo Motor Motion Controller Card	Inquire

Home \| Products \| Accessories \| Knowledge Center \|About Us \| Testimonials \|Terms of Use \| Videos \|Site Map \| Contact Us

Optimal Engineering Systems, Inc.
Los Angeles, California, USA
	Toll Free Number (888) 777-1826 in USA
+1 (818) 222-9200
		oes@oesincorp.com
Copyright © 1998 - 2011 Optimal Engineering Systems, Inc., All Rights Reserved