the motion control company
(888) 777-1826
+1 (818) 222-9200
Home About Us Videos Site Map Contact Us
Products
Motion Controllers
Linear/ Rotary Actuators and Stages
Motors -  Stepper, Servo
Motor Drivers - Stepper, Servo
Solenoid Control Electronics
Power Supplies
Accessories
Knowledge Center
Motion Control Block Diagram
About Us
Site Map
Movies

Solenoid Control System

Data Sheet
Hardware Reference Manual in PDF

Similar Solenoid Controller and Driver Products

Pick and Hold Module 
Proportional (PWM) Module
Closed Loop Solenoid Position Control Module
Pick and Drop Module
Load On-Off Power Cycling Module
Dual Proportional Valve Controller
Solenoid Control System
Related Products
Control Module
Power Supplies
Features
  • Compact

  • Plug-and-Play

  • Stand-alone

  • Runs Multiple Devices Simultaneously

  • Complete Unit Integrates Controller, Power Supplies and Drivers

  • Quick and Easy to Install

  • Very Compact and Easy to Use

  • Easy Programming Language, No Compiler or Assembler Required

  • Different Modes of Operation:
    1) Host Controlled

    2) Stand-alone, No PC Required to Operate
 
Typical Applications
  • Life Cycling

  • Endurance Testing

  • Shock and Vibration Testing

  • Vibration Cancellation

Software

  • Easy System Setup and Evaluation

  • Menu Driven

  • Free Software Included
 

 

The Solenoid Control System is designed for Cycling and Endurance Testing of electro-mechanical components. The system may be used as both an engineering evaluation and production quality assurance tool. Each system may drive up to thirty two independent devices with different actuation profiles.

The typical applications of the tester is life cycling of the solenoids, electro-magnets, relays, motors, voice coil motors, actuators, valves, keyboards, switches, and other applicable devices. The other applications of LC tester is testing and evaluation of shock and vibration systems.

The compact and stand-alone unit consists of controller,  drivers, and the power supplies. It conveniently connects to the serial port of the host computer.

The system may be controlled in different ways;

1) Stand-alone
In this mode, the controller does not need an external device such as a PC to operate. The controller is programmed in a simple programming language. The code is developed, downloaded to the controller, run and saved in the controller's non-volatile memory using the supplied Integrated Development Environment (IDE) software.

2) Externally Controlled
In this mode, the external host such as a PC, micro-controller or PLC sends a series of commands to the controller via the RS-232 serial port. The controller processes and performs the incoming commands and responds with proper messages.

3) Externally Triggered
In this mode, the external host such as a PC, micro-controller or PLC sends the triggering pulses to activate the solenoids.


TECHNICAL DATA

Actuators
  • Linear and Rotary Solenoids
     
  • Voice Coil Actuators
Actuator Driver
  • Excellent Linearity
     
  • Pulse Width Modulated (PWM)
     
  • Wide Output Voltage
     
  • High Output Current

  • Current Controlled or Voltage Controlled

Mechanical

  • Size: 10.0'' (25.000 mm) W X  10.8" (265.00 mm) D X 4.875.00" (124 mm) H

  • Material: Aluminum, 0.09" (2.3 mm) Thickness

  • Available in 19" Rack Mount Enclosure

Power Requirement

  • 110 VAC, 50 ~ 60 Hz Or

  • 220 VAC, 50 ~ 60 Hz Or

  • +12 VDC to +50 VDC

 

Communication Interface
  • RS-232 Interface
Optional Feedback Devices
  • Proximity Sensors
     
  • LVDTs and RVDTs
     
  • Laser Interferometers

  • Pressure Transducers

  • Any Analog Signal
     
  • Absolute and Incremental Optical Encoders
General Specifications
  • LED Power Indicator

  • High Performance Line Filter

  • Compact Industrial Enclosure

  • Drives up to 32 Devices Simultaneously

 

Ordering Information

Part No. Description Amount
LCET-PH-2 Two-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PH-4 Four-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PH-6 Six-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PH-8 Eight-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PH-10 Ten-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PH-12 Twelve-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PH-14 Fourteen-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PH-16 Sixteen-device Solenoid Control System, Incorporating Pick and Hold Module Inquire
LCET-PWM-1 One-device Solenoid Control System, Incorporating PWM Module Unit Inquire
LCET-PWM-2 Two-device Solenoid Control System, Incorporating PWM Module Unit Inquire
LCET-PWM-3 Three-device Solenoid Control System, Incorporating PWM Module Inquire
LCET-PWM-4 Four-device Solenoid Control System, Incorporating PWM Module Inquire
LCET-EXT-xx Solenoid Control System,  Incorporating Pick and Hold Module, Externally Triggered Inquire


 


Home | Products | Accessories | Knowledge Center |About Us | Testimonials |Terms of Use | Videos |Site Map | Contact Us
                                             
Optimal Engineering Systems, Inc.
Los Angeles, California, USA

       Toll Free Number (888) 777-1826 in USA

+1 (818) 222-9200Sales%20-%20ControlofMotion.com
 

Sales - ControlofMotion.com

Copyright   1998 - 2014 Optimal Engineering Systems, Inc., All Rights Reserved