This module offers a very low cost solution for limited angle / stroke
position control.
The Closed Loop Solenoid Position Control Module is designed to
control the position of a solenoid plunger / shaft, voice coil
motor or similar
devices. Since the solenoid moves only in one direction, a return force
generated by another component is required. This could be a
spring loaded solenoid ,
another solenoid positioned in the opposite direction or hydraulic
force.
The PID controller is easily adjusted using the onboard
potentiometers.
This product is RoHS compliant.
Performance Specifications
Parameter
Min
Typical
Max
Units
Supply Voltage
9
50
VDC
Peak Current
15
A
Average Current
4
A
Input Control
- Voltage Controlled
0
5
VDC
Input Control
- Current Controlled
4
20
mA
Operating Temperature
0
50
Deg C
Mechanical Specifications
Mounting Pattern
Four 6-32 Screws
Dimensions
3.00”W,
2.95”D, 0.85”H (76.2 mm, 75.0 mm, 21.5 mm)
Ordering Information
Part No.
Description
Amount
CLSP-01
Single-device
Closed Loop
Solenoid
Position Control Module,
,
0-5 VDC
Inquire
CLSP-03
Single-device
Closed Loop
Solenoid
Position Control Module,
, 4-20 milliamps Input Signal
